How to remove rust from shower tile

This blog post will answer the question, “how to remove rust from shower tiles” and cover topics like methods of removing rust from shower tiles, how to clean shower tiles, and frequently asked questions.

How to remove rust from shower tile?

Rust from shower tiles can be removed by using equal parts lime juice and borax. Another cleaning option is to combine equal parts salt and white vinegar and let it sit for 3 to 4 hours before scouring. Corrosion stains may be removed using a pumice stone.

Method of removing rust from shower tile

Leaky toilets, showers, and sinks may cause rust spots, making your bathroom seem filthy and cluttered. Rust may cause the tile to deteriorate, resulting in gaps in the tile and the floorboard. Furthermore, the finish on the shower tile may be harmed as a result of this. Further harm may be avoided by repairing the leaking spot.

However, eliminating the rust spots will save you money on tile replacement. To safeguard the tile, it’s critical to clear the rust spots as soon as possible.

Tip for cleaning rust from shower tiles:

Allow the cleanser to soak in longer if the rust stain is tenacious. Scrubbing should be done after 10 to 15 minutes, for example.

Steps for removing rust from shower tiles:

  • Purchase a rust-stain-removal bathroom tile cleanser. Bar Keepers Friend, Lime and Corrosion Remover, Clorox Green Works Bathroom Cleaner, and Tile & Grout Magic are just a few of them. Other items may be beneficial; check the label to see whether the product is safe to use on the tile as well as for rust stain removal.
  • Apply a drop of tile cleanser to the rust spot area or spray it. Allow approximately six minutes for the cleanser to absorb the stain.
  • Scrape the tile cleaner into the floor with a brush. To prevent scraping or scratching the tile, the bristles are gentle. Scrub the tile in a circular motion, being sure to cover the whole surface.
  • Immerse a sponge in warm water for a few minutes. It should be wrung out. Wipe the bathroom tiles with a damp cloth. Eliminate the corrosion and cleaning solution by going over the area again. Frequently squeeze the sponge.
  • Completely dry the area. Repeat Steps 2–4 if the stain continues. 
Materials Needed
Bathroom tile cleaner
Scrubbing brush

How to Clean Bathroom Tiles?

Bathrooms play a vital role in our daily lives. A well-designed and tidy bathroom may make or break the selling of a house. Tile in the shower is a particularly cost-effective option since it is both durable and simple to clean. Tiles that are left untreated for an extended period of time, on the other hand, may acquire mineral and soap deposits, as well as grout stains from mildew and mold growth. Bathroom tile cleaning is a chore that involves a lot of elbow grease as well as some quality products.

Steps for cleaning rust from bathroom tiles:

  • Start with a spray-on bathroom cleanser and a kitchen scour sponge, depending on the degree of the grime and mold. Working from top to bottom, wet the tiles and spray on the cleaner.
  • Scrape the whole area, concentrating on the tile’s surface rather than the grout. Scrub the tiles in circular movements, using firm pressure. Scrape the tiles’ edges in straight lines, back and forth. Rinse well with warm water.
  • If the deposits continue to obscure the tiles’ surface, attempt to identify whether the residue is caused by hard water, iron in the water, or soap residue. A dark spot will appear if the water contains a lot of iron. Most soaps produce a milky film, whereas hard water leaves a green stain.
  • Begin with scrubbing with white vinegar. It may be used at full power if gloves are used. Your job is over when the tiles are spotless and gleaming. Scrubbing with bathroom products intended to eliminate rust or iron deposits is a good idea next. 
  • If all else fails, clean the toilet bowl using toilet bowl cleaner. This is quite caustic and should not be kept on for an extended period of time. It may also erode plumbing fixtures, so make sure they’re clean.
  • If the grout is discolored, it must be cleaned. Spray a little diluted liquid bleach on your white grout and let it sit for a few minutes before cleaning. Colored grout should be scraped in a circular motion using a baking soda paste. 
  • If they don’t work, follow the manufacturer’s instructions for using a professional grout cleaning. Regular washing and drying time are essential for keeping grout clean.


When utilizing chemical cleaners, always wear gloves. Utilize a face mask if you’re going to use spray cleaners.

Materials Needed
Bathroom cleaner

Use These Simple Home Remedies to Get Rid of Rust Marks on Tiles

Do you have rust spots on your tiles? To get rid of those markings in no time, use these easy home cures!

In every aspect, tile flooring adds to the attractiveness of our houses. However, washing them correctly is critical since aging, corrosion, and occasionally cracking of the flooring may occur. Among all of them, corrosion seems to be the most common problem that individuals face in their kitchens or other moist places.

Metal furniture, home decorating items, Propane cylinders, cutlery, and other metal objects may cause rust spots on the floor. Rust is produced mostly by hard water, and it makes your flooring seem dirty and untidy. Furthermore, corrosion may damage the tiles, resulting in holes. 

There’s no need to be concerned since you can easily eliminate rust spots and unsightly spots by using some common home components given below:

  • Lemon
  • Toothpaste
  • Vinegar
  • Kerosene
  • Tomatoes


Lemon is a citrus fruit strong in citric acid that is virtually universally available as a natural cleanser. It can not only clear burned vessels and rust traces from floors, but it can also kill germs because of its antimicrobial characteristics. To get rid of rust stains, just follow these steps:

Steps of using lemon to remove rust from shower tiles:

  • In a bowl, squeeze the lemon juice and season with salt.
  • 14 tablespoons of the juice should be poured over the rust spot.
  • Allow for a 10 min rest period. After that, clean it with a soft-bristled toothbrush. You’ll notice that the rust spot on the floor starts to fade.


Toothpaste is a wonderful, gentle mild detergent. While there is a variety of toothpaste available, the one prepared with sodium bicarbonate not only eliminates dental plaque but also helps to erase scratches and spots.

Steps of using toothpaste to remove rust:

  • Using a thin application of toothpaste, cover the rust spot.
  • Start stroking a soft-bristled brush up and down in circular strokes. After that, wipe the tiles off with water or wrapping paper.


No other home cleanser is as effective as vinegar. Whether it’s a mineral layer, oil, or corrosion, vinegar’s acidic quality can eliminate all of these tenacious spots in no time.

Steps of using vinegar to remove rust from shower tiles:

  • On the rust spot, pour 2-3 teaspoons of vinegar. Allow it to settle for 3-five min.
  • Wipe down the floor with a clean, soft cloth.
  • Re-enact the same procedure. The rust spot on the floor will start to go away.


When it comes to eliminating corrosion from any material, nothing beats kerosene. It’s comparable to vinegar, but it’s stronger and faster.

Steps of using kerosene for removing rust from shower tiles:

  • Over the stain, pour 2 teaspoons of kerosene.
  • Allow for a ten-minute rest period. Scrub the surface with a soft cloth.
  • Do not clean. Allow for another five min before cleaning with water or a paper towel.


Tomatoes, like lemons, have a citrus taste to them. It contains an acid that works wonders when it comes to eliminating accumulated minerals or spots. If you’re fed up with cylinder markings in your kitchen, just do the following:

Steps of using tomato for removing rust from shower tiles:

  • Take a tomato and chop it in half.
  • Sprinkle a bit of salt over the rust, then massage it with a tomato slice.
  • Allow the resides to sit for 5-7 minutes. Clean with a gentle cloth when finished.
Materials Needed
Lemon juice

Is it possible to remove corrosion off tiles using WD-40®?

Yes, it is possible to remove rust from tiles using WD-40. Rust spots on tiles are more prevalent than you may believe and are generally produced by spray cans or paint tins being left on damp floors, or by outdoor furniture corroding and leaving a rust spot on the ceramic tile. WD-40, on the other hand, may swiftly and effectively remove rust off tiles.

Using WD-40 to Prevent Corrosion from Tiles

WD-40 Multi-Use Product is an easy-to-use rust removal that you’ve undoubtedly used for routine home jobs like mending a noisy door or unsticking a jammed ledge. If you’re merely working with surface corrosion or a rust spot, spritz some WD-40 straight on the stain, wait 10 minutes, then clean it away with a towel or an old toothbrush.

If the corrosion is really tenacious, you might need to use a gritty sponge. So you don’t have to put up with obstinate rust spots on your patio or damp floor anymore. Your tiles will be as fresh and new in no time with a fast scrape.

Frequently Asked Questions(FAQs), “How to remove rust stains from shower tile?”

How do you remove stains from ceramic tiles?

  • To remove stains from ceramic and porcelain, use a 3 percent hydrogen peroxide solution. 
  • Prepare a mixture with one part peroxide and 2 parts baking powder for mild surface cleaning. 
  • Before cleaning and washing, apply this mixture and let it stay for around thirty min. 
  • Peroxide may also be poured directly on difficult spots.

Will CLR remove rust from tiles?

CLR proved to be a flexible corrosion remover that worked well in all of the situations we tested.  It may be used on surfaces including tile, vinyl, and concrete, as well as tiny home items like coffee makers and teakettles.

Does vinegar remove rust?

White vinegar may be used to effectively remove rust. Rust interacts with vinegar and eventually disappears. To eliminate corrosion from a rusted metal item, immerse it in white vinegar for a few hours and then wash it clean. Alternatively, you may clean the item with a towel moistened with white vinegar.

How do you remove rust stains from porcelain?

Because it won’t damage or harm your surface, a regular pumice stone is also a wonderful technique to remove corrosion, particularly from porcelain. Simply moisten the stone, wet the rusted area, then softly wipe the rock over the rusted area to eliminate the rust. Combine lime juice and salt in a bowl.

What chemical removes rust?

Phosphoric acid is the most often used rust-removal agent. When sprayed on rust, the solution causes a chemical reaction, turning it into a water-soluble molecule that can be washed away fast and simply.

Can you use white vinegar to clean ceramic tile?

Furthermore, vinegar sanitizes most hard surfaces while also removing oil and tough water stains. And the greatest thing is that when it cures, it leaves a fresh, neutral aroma behind. Vinegar may be used to clean coated or unglazed ceramic or porcelain tiles without harming them.


Leave a Comment