How to remove rust stain from ceramic tile

This blog post will answer the question, “how to remove rust stain from ceramic tile” and cover topics like how to remove rust stains from tiles, use home remedies to remove rust, and frequently asked questions.

How to remove rust stain from ceramic tile?

Rust stains from ceramic tiles can be removed by following the guidance given below:

  • To remove rust spots from ceramic tile, use equal amounts of lime juice and borax. 
  • Another cleaning option is to combine equal measures of salt and white vinegar and let it sit for 3 to 4 hours before scraping. 
  • Rust spots may be removed using a pumice stone.

Rust Stains on Ceramic Tiles: How To Remove Them?

When metal is exposed to moisture for an extended length of time, it rusts. Rust spots on your ceramic flooring are fairly uncommon as a consequence of cooking equipment and other metal items or furnishings. If this is the case, use the steps below to thoroughly eliminate the spots and return your tiles to their former brilliance.

  • Observe all safety precautions
  • Get Rid Of Any Objects In The Area
  • Begin by cleaning the floor
  • Remove the corrosion using a cleaning solution
  • Using A Pumice Stone to Scrub
  • Conclusion

I will now elaborate on the guidance given above.

Observe all safety precautions

For the best results, you’ll need a few chemicals and abrasives to eliminate rust spots from your tiles. They might be natural or manufactured products. Whatever the situation may be, you must safeguard yourself. These items may dry out your skin or trigger another response if they are applied to bare skin.

As a result, you should use protective gloves to avoid any skin concerns. In case of spills or spills, you should also wear overalls or at least older clothing.

Get Rid Of Any Objects In The Area

Eliminate any adjacent furniture or items if the rust spots are on the bath tile flooring or in the living room. Keep in mind that the cleaning chemical may spread over these items, causing harm. To be safe, make sure you get anything out of the way of the area you’re going to clean.

Begin by cleaning the floor

Fill a bucket halfway with water and a little amount of detergent. Immerse a sponge in the lathered water and use it to clean the rusty area. To eliminate any debris or tiny residues from the region, scrape the area vigorously.

Remember that this will not remove the rust, but it will keep the area fresh and enable you to easily observe the rust spots as part of your total preparation. After you’ve completed cleaning and eliminating the dirt, rinse the tile surface with safe water and a sponge to eliminate any detergent residue.

After that, dry the majority of the surface water with a clean towel before allowing it to air dry fully.

Remove the corrosion using a cleaning solution

You’ll need to make a suitable cleaning solution to get rid of the rust spots.

a. The ideal choice is to combine lime juice with borax, which forms a slurry when combined altogether. Make sure both items are mixed in the same quantities.

Scoop up the paste with a spatula and apply it to the tile with the rust spots. Allow the paste to dry completely without touching it. You may wipe it away with a sponge after it’s totally dried, then wash the area with fresh water.

b. You may also make a vinegar solution by mixing equal measures of vinegar and salt. Allow 5 hours for the paste to dry before applying some hot water. After that, gently clean the area with a sponge. It may take some time for the rust spots to be totally gone, but be patient and keep washing.

c. Finally, you have the option of employing ready-made solutions. You should be able to purchase a cleaning fluid for rust spots on tiles at your local supermarket or food shop. Make sure it’s safe for the environment and won’t harm your tile flooring in any manner.

Using A Pumice Stone to Scrub

You should also use a pumice stone to remove stains from your tile flooring. If the rust spots are obstinate and the pumice stone won’t harm the surface, they’ll come in helpful.


Your tile flooring has the potential to make or destroy your house. They have a lot of advantages, including a long lifespan. If you really want to keep them looking fresh new, use these simple steps to get rid of any unattractive rust spots.

To get the greatest results, make sure you use the correct cleaning fluid. Look no farther than Slique if you’re seeking a skilled and highly specialized tile and stone maintenance firm. Slique has fully advanced techniques and procedures, allowing us to give an unrivaled tile cleaning service.

Materials Needed
Pumice Stone
Lime Juice

Use These Simple Home Remedies to Get Rid of Rust Marks on Tiles

Do you have rust spots on your tiles? To get rid of those markings in no time, use these easy home cures!

In every aspect, tile flooring adds to the attractiveness of our houses. However, washing them correctly is critical since aging, corrosion, and occasionally cracking of the flooring may occur. Among all of them, corrosion seems to be the most common problem that individuals face in their kitchens or other moist places.

Metal furniture, home decorating items, Propane cylinders, cutlery, and other metal objects may cause rust spots on the floor. Rust is produced mostly by hard water, and it makes your flooring seem dirty and untidy. Furthermore, corrosion may damage the tiles, resulting in holes. 

There’s no need to be concerned since you can easily eliminate rust spots and unsightly spots by using some common home components in the following manner:

  • Lemon
  • Toothpaste
  • Vinegar
  • Kerosene
  • Tomatoes

Now I will elaborate on the guidance given above.


Lemon is a citrus fruit strong in citric acid that is virtually universally available as a natural cleanser. It can not only clear burned vessels and rust traces from floors, but it can also kill germs because of its antimicrobial characteristics. To get rid of rust stains, just follow these steps:

Steps of removing rust from ceramic tiles by using lemon:

  • In a bowl, squeeze the lemon juice and season with salt.
  • 14 tablespoons of the juice should be poured over the rust spot.
  • Allow for a 10 min rest period. After that, clean it with a soft-bristled toothbrush. You’ll notice that the rust spot on the floor starts to fade.


Toothpaste is a wonderful, gentle mild detergent. While there is a variety of toothpaste available, the one prepared with sodium bicarbonate not only eliminates dental plaque but also helps to erase scratches and spots.

Steps of removing rust from ceramic tiles by using toothpaste:

  • Using a thin application of toothpaste, cover the rust spot.
  • Start stroking a soft-bristled brush up and down in circular strokes. After that, wipe the tiles off with water or wrapping paper.


No other home cleanser is as effective as vinegar. Whether it’s a mineral layer, oil, or corrosion, vinegar’s acidic quality can eliminate all of these tenacious spots in no time.

Steps of removing rust stains from ceramic tiles by using vinegar:

  • On the rust spot, pour 2-3 teaspoons of vinegar. Allow it to settle for 3-five min.
  • Wipe down the floor with a clean, soft cloth.
  • Re-enact the same procedure. The rust spot on the floor will start to go away.


When it comes to eliminating corrosion from any material, nothing beats kerosene. It’s comparable to vinegar, but it’s more strong and faster.

Steps of removing rust from ceramic tiles by using kerosene:

  • Over the stain, pour 2 teaspoons of kerosene.
  • Allow for a ten-minute rest period. Scrub the surface with a soft cloth.
  • Do not clean. Allow for another five min before cleaning with water or a paper towel.


Tomatoes, like lemons, have a citrus taste to them. It contains an acid that works wonders when it comes to eliminating accumulated minerals or spots. If you’re fed up with cylinder markings in your kitchen, just do the following:

  • Take a tomato and chop it in half.
  • Sprinkle a bit of salt over the rust, then massage it with a tomato slice.
  • Allow the resides to sit for 5-7 minutes. Clean with a gentle cloth when finished.
Materials Needed
Lemon juice

Is it possible to remove corrosion off tiles using WD-40®?

Rust spots on tiles are more prevalent than you may believe and are generally produced by spray cans or paints tins being left on damp floors, or by outdoor furniture corroding and leaving a rust spot on the ceramic tile. WD-40, on the other hand, may swiftly and effectively remove rust off tiles.

Using WD-40 to Prevent Corrosion from Tiles

WD-40 Multi-Use Product is an easy-to-use rust removal that you’ve undoubtedly used for routine home jobs like mending a noisy door or unsticking a jammed ledge. If you’re merely working with surface corrosion or a rust spot, spritz some WD-40 straight on the stain, wait 10 minutes, then clean it away with a towel or an old toothbrush.

If the corrosion is really tenacious, you might need to use a gritty sponge. So you don’t have to put up with obstinate rust spots on your patio or damp floor anymore. Your tiles will be as fresh and new in no time with a fast scrape.

Frequently Asked Questions(FAQs), “How to remove rust stain from ceramic tile?”

How do you remove stains from ceramic tiles?

To remove stains from ceramic and porcelain, use a 3 percent hydrogen peroxide solution. 

  • Prepare a mixture with one part peroxide and 2 parts baking powder for mild surface cleaning. 
  • Before cleaning and washing, apply this mixture and let it stay for around thirty min. 
  • Peroxide may also be poured directly on difficult spots.

Will CLR remove rust from tiles?

CLR proved to be a flexible corrosion remover that worked well in all of the situations we tested.  It may be used on surfaces including tile, vinyl, and concrete, as well as tiny home items like coffee makers and teakettles.

Does vinegar remove rust?

White vinegar may be used to effectively remove rust. Rust interacts with vinegar and eventually disappears. To eliminate corrosion from a rusted metal item, immerse it in white vinegar for a few hours and then wash it clean. Alternatively, you may clean the item with a towel moistened with white vinegar.

How do you remove rust stains from porcelain?

Because it won’t damage or harm your surface, a regular pumice stone is also a wonderful technique to remove corrosion, particularly from porcelain. Simply moisten the stone, wet the rusted area, then softly wipe the rock over the rusted area to eliminate the rust. Combine lime juice and salt in a bowl.

What chemical removes rust?

Phosphoric acid is the most often used rust-removal agent. When sprayed on rust, the solution causes a chemical reaction, turning it into a water-soluble molecule that can be washed away fast and simply.

Can you use white vinegar to clean ceramic tile?

Furthermore, vinegar sanitizes most hard surfaces while also removing oil and tough water stains. And the greatest thing is that when it cures, it leaves a fresh, neutral aroma behind. Vinegar may be used to clean coated or unglazed ceramic or porcelain tiles without harming them.


Leave a Comment