How to rustproof a motorcycle

This blog post will answer the question, “How to rustproof a motorcycle?” and covers topics like how to reduce rust on motorcycles, how to remove rust from different parts of the motorcycle, and frequently asked questions.

How to rustproof a motorcycle?

Following the guidance is helpful in rustproofing a motorcycle.

  • Provide the motorcycle’s engine and metallic components a good coverage with a penetration lubricant or a corrosion-proofing mist.
  • Although the driving chain is already lubricated, spray some oil into a towel and clean both faces of the drive chain’s connections, which are particularly prone to rust.

Highly recommended lubricant:

WD-40

What Induces Rust on Motorcycles?

  • When a material is subjected to air and water, it rusts. Metallic parts on your motorcycle will rust if they get soggy, have humidity, are poured on, or make contact with dampness in any manner. 
  • Rusting is accelerated by compounds such as chloride used to avoid ice in the wintertime or waxes, sludges, and fuels thrown on the street by passing traffic.

Preventing Rust on Motorcycles:

There is no one-size-fits-all approach for totally eliminating corrosion on your bike. You can, though, slow down the procedure. When it comes to preventing rust on your motorcycle, limiting your contact to salts, toxins, and humidity can assist. 

Following measures can be helpful in controlling rust on motorcycles:

  • Motorcycle Should Be Covered
  • Your Bike Should Be Washed and Waxed
  • Use Corrosion-Prevention Products 
  • Fill Up Your Gas Tank

Motorcycle Should Be Covered:

Why motorcycle covers are necessary to use:

  • Place your motorbike in a shaded spot, including a shed or covered yard. 
  • If you don’t have accessibility to a carport, use a motorbike cover. 
  • If you must leave your motorbike in the open, purchase a motorbike cover to shield it from moisture, snow, and humidity.

Your Bike Should Be Washed and Waxed:

Washing and waxing are compulsory due to following reasons:

  • Clean your motorbike to get rid of toxins that can hasten rust. 
  • If the routes have been salted, this is especially crucial in the cold season. 
  • The more you clean your motorbike with a good bike wash, the better it will be secured from corrosion.
  • All painted components, including the gas tank, bumpers, and side coverings, should receive a layer or two of wax. 
  • Water will seep into even the tiniest crack or flaw in the paint, but a few coatings of wax can keep it out.

Here is highly recommended wax:

Biker Wax

Motul 103258 Wash and Wax

Use Corrosion-Prevention Products:

  • Apply an anti-corrosion agent or rust prevention to all metallic components and areas, and eradicate any emerging rust stains as soon as feasible.
  • Rust produces cracking and degrades components until they have to be replaced. 
  • Repair any rust-damaged portions to keep them from rotting worse. 
  • Retouch painted portions to seal up the steel underneath, and use anti-corrosion solutions to clean off uncovered metal parts.

Fill Up Your Gas Tank:

  • The inside of steel gasoline containers is renowned for rusting.
  •  Fill the gas tank with petrol and add a gasoline stabilizer if your motorbike will not be driven for a long stretch of time, such as over the winters.
  • Inside a tank of fuel, there seem to be no open areas for corrosion to grow, and the gasoline stabilizer will preserve the gas pure over several weeks. 
  • If your container is already corroded, treat it with a fuel tank corrosion cleaner.
  • Do not let rust-prevention tips for motorcycles slip through the gaps.

Here’s a top recommended fuel stabilizer:

STA-BIL 360 

Few simple steps to remove rust from motorcycle:

The very first task is to avoid rust formation. Corrosion should be kept at bay with frequent maintenance work. Leaving aside the preachy part about preventive maintenance, what DIY choices do you have if your motorcycle has rusty spots?

  • To start, wipe away grime by washing the trouble spots with motorbike soap and freshwater. Using a soft cloth, clean the spots dry.
  • Using an abrasive such as brillo pads, scratch the corrosion off the most problematic locations. 
  • Turn to a less abrasive medium like Scotch Brite once the majority of the corrosion has been gone. 
  • Take better care not to scrape too hard, as this could damage the metal or corrode the surface paint if you’re not careful.
  •  Eliminate corrosion from difficult areas with a microfiber cloth.

Use chromium-based polish:

  • Use chromium-based polish to remove any exterior corrosion and smooth out scuff marks on your motorcycle. 
  • Apply a layer of wax to the metal parts once you’ve finished polishing to preserve them from the environment and stop corrosion from growing.

If any of the following scenarios apply, do not pursue the above-mentioned methods:

  • You wish to restore a classic motorcycle to its previous splendor.
  • If the motorcycle has rusted to a cinder block and requires extensive maintenance, you may have to repair some parts.

How to remove rust from different parts of motorcycle:

How to remove rust from motorcycles frame:

You may have recently purchased a motorcycle and observed some minor rust stains on the frame in numerous places, or this may be your winter task to wipe down the frame of all the corrosion, grime, and other debris, and you’d like to know a few of the easiest ways to do so for a reasonable price. 

You’ve arrived at the right place, where we’ll go over several methods for removing the rust patches from your frame. 

  • If you’re worried about the interior frames and ducts of your motorbike or scooter, remember that tubes are thick, and would take a lot more corrosion to cause a systemic issue. 
  • Vehicle metal, on the other hand, corrodes far more quickly. You’ll never be able to get rid of them until you sandblast them and then coat them (powder coating). 
  • It would be hard to extract it with sandpaper from the microscopic crevices, such as on the welds. 
  • Tinfoil with a lube dab such as tri-flo, WD40, or simply water will clear up the stains better than plain wool or tinfoil. Water? Yes, it is effective. All you have to do now is rinse it and add some safety. 
  • If you don’t worry too much about the appearance, get some nice priming color, sand away the corrosion as much as you could about it, and then varnish it. 
  • Then, either go over the baseline with genuine paint or apply previously mixed paint over the baseline. 
  • Most acrylic shops can create a standard hue for you, or you can choose a standard shade.

People have even been trying with some ways, such as:

  • vinegar and aluminum foil:

Steps:

  • Crush the aluminum foil roughly and splatter it with a dab of vinegar (that may be a weak acid), and then go to work.
  • It works wonderfully, but you must rinse off the acid or it will continue to corrode once you have finished with it. It also has a fairly strong odor.
  • I’ve also noticed that potatoes, or even regular simple Coca-Cola, will help with surface corrosion. Knead it in and wipe this with cola until it becomes completely clean.
  • If you were using metal wool to clear the rusty places, there’s a chance, however, the corrosion is fairly firm. In this situation, visit an automotive parts shop and purchase a container of naval gel.
  • Naval jelly can be helpful in removing rust.
  • It’s a mild acid that eats down rust rapidly, and then you just flush it away. 
  • A container costs less than ten dollars. The main issue with eliminating corrosion is that you must add some type of security or it will return. 
  • I’ve observed raw metal pieces that I was able to clean of flash corrosion in under an hour.
  • If weather causes the frame to corrosion, you can scrape off the corrosion and sprinkle the region with Rustoleum, having fish oil and never hardens thus preventing future corrosion. 
Things Needed
Tri-flo
WD-40
Vinegar
Coca-Cola
Rustoleum
Naval Jelly

How to eliminate rust from the spokes of a motorbike:

What methods are individuals utilizing to polish their spokes without having to remove their rims?

If spokes had exterior corrosion, would you trust them if they were oiled? How long will you wait before purchasing a new set of wheels?

  • Aluminum foil is the solution to all of the aforementioned issues, and yeah, you may use it on chromium objects. 
  • It makes no difference if it’s crumpled or balled up because the aluminum is milder than that of the harsh chromium and won’t damage it. 
  • However, keep an eye out for any other aluminum areas or paints.
  • To begin, dip some aluminum foil into WD40 and scrape it. Keep the aluminum foil moist and prevent wrinkling (folding it).  
  • Bathing the smooth surface in WD40 provides the added advantage of preserving it till you can apply something a little more substantive.
  • You’ll never have an issue with dents, scrapes, or whatever else.
  •  Just keep it moist since it will likely take a few sheets to disintegrate as they’re so thin.
  • Thin wire wool can also be used for items like sprockets or pieces with crannies since it is quicker to pack in or loop around.
  •  However, as previously said, something should be added to keep it moist.

Removing rust from chrome:

You can attempt a number of various approaches. 

The foil and cola technique:

  • The foil and cola technique is a great way to save money.
  • Try the coke and foil technique if the chrome isn’t peeling but you can see corrosion on the outside. 
  • To begin, rip a piece of tinfoil and put a can of coke – preferably coke zero – upon it. 
  • Next, use the tinfoil and cola to lightly wipe the rusted area of the motorcycle. 
  • This should easily eliminate the rust from the motorcycle without damaging it.
  • Do it in small parts, then wash and repeat till all the rust has been gone.

The vinegar technique:

  • You can attempt the vinegar approach if any of the above won’t work. 
  • Wipe the corroded sections lightly with a piece of brillo pads soaked with baking soda and vinegar. 
  • For all of this, you’ll like to work for small parts and avoid letting the vinegar harden entirely since this could lead to more problems. 
  • Before continuing on, make sure you’ve removed all of the vinegar and that each portion is thoroughly dry.

Make use of chrome polishing:

  • Chrome polish may help eliminate corrosion while also adding a protective barrier to your motorcycle and providing it with that distinctive chrome luster. 
  • If you already have any chrome polish on hand, massage the rusted region with a soft towel or pad till the rust is removed.

Here’s the top-recommended chrome polish:

Meguiar chrome polish

Frequently Asked Questions(FAQs): How to rustproof a motorcycle

Will motorcycle cover prevent rust?

Moisture, frost, and ice are all protected by motorcycle covers.

If it penetrates into the motor or carb, this is especially true. Motorbike covers will keep the water from having direct contact with the motorcycle, but they can also keep humidity from forming, which can lead to corrosion and rot.

Will my motorcycle rust in the rain?

  • To put it another way, long rain (water) contact mixed with keeping your bike parked for an extended period of time will be detrimental to your motorcycle. 
  • Rot and corrosion are caused by prolonged contact to rain (or moisture). Both of these things are quite harmful to the motorcycle.

Is rust on a motorcycle bad?

  • Corrosion impairs the flow of petrol through your motorbike. Filters and gasoline lines become congested, causing fluid to accumulate. 
  • Rust can build up within the cylinder, reducing the amount of air that mixes with the gasoline. Getting a new tank for your motorcycle if it’s rusted beyond fixing is really not feasible.

Are motorcycle covers worth it?

  • Is it worthwhile to invest in motorbike covers? Whether a motorbike is housed inside or outside, it is worthwhile to invest in a high-quality cover. 
  • A bike cover is advantageous since it shields a motorcycle from moisture, Ultraviolet rays from the sunlight, dirt, and preserves it hidden from potential thieves.

How do I stop my motorcycle from rusting in my garage?

  • Provide the motorcycle’s engine and metallic components a good coverage with a permeating oil (e.g. WD-40) or a corrosion-proofing mist.
  • Whereas the drive belt is already lubricated, spray some oil into a cloth and clean both ends of the driving chain’s connections, which are particularly prone to rust.

How do you store motorcycles for years?

  • Surface Preparation. Allowing beetle innards or water stains to remain on your paint will damage the surface, so provide it a good washing before putting it down.
  • Pay attention to the Batteries.
  • Gasoline system Preparation.
  • Engine oil should be changed.
  • Don’t Forget to Check Your Tyres.
  • Use motorcycle covers

References:

https://twistedthrottle.com/blog/how-to-prepare-your-motorcycle-for-long-term-storage/
https://www.bennetts.co.uk/bikesocial/reviews/products/motorcycle-maintenance-and-servicing/best-rust-corrosion-preventer-inhibitor
https://www.partzilla.com/blog/how-to-prevent-motorcycle-rust
https://www.streetdirectory.com/travel_guide/48847/motorcycles/how_to_make_your_motorcycle_rust_free_and_look_showroom_quality.html
https://www.zigwheels.com/guide/two-wheeler-maintenance-guide/tips-to-remove-rust-from-motorcycles/14707/
https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiSlsGu7d_zAhXZ7e0KHeCTA68YABABGgJkZw&ae=2&ohost=www.google.com&cid=CAESP-D2uK7AfFKMywgix9hLcTNpyxYHhiM5jOUSgY4IHispQdysYf_LniQRgf3hxbEjfXLuY2UN-bXjmxfgsg1dQQ&sig=AOD64_3ygDMyEtrRc-4bzHaFhPmeflmdWw&q&adurl&ved=2ahUKEwi4rriu7d_zAhVnA2MBHa4pDSIQ0Qx6BAgCEAE

Leave a Comment