How to rustproof brass

This blog post will answer the question, “How to rustproof brass” and covers topics like different ways to keep brass from rusting, a few tips to remove rust, and frequently asked questions.

How to rustproof brass?

Brass can be made rustproof by applying a dry coating to it. A corrosion protective dry coating is perfect for brass or other metal components that have to keep clean or provide a firm grip. Dry coating corrosion preventatives, such as ARMOR’s Dry Coat Rust Preventative, can be applied in a variety of ways, including spraying, dipping, and washing. The covering will be in place once they have dried.

How to keep brass from rusting?

There are several common methods for protecting brass from rusting:

  • Use, oiling, and waxing on a regular basis
  • Topping with powder
  • Electroplating
  • Galvanizing
  • Bluing
  • Store Properly
  • Cover the surface with a dry coat

I will now elaborate on the guidance given above:

Use, oiling, and waxing on a regular basis:

Benefits of applying oil:

  • When oil is applied to brass, it provides a safety layer that prevents outside particles from penetrating. This involves the use of water. 
  • The rusting process does not begin because Water cannot permeate the brass. Oil repels both direct and indirect water, and also the water found in oxygen.

How oil prevents from rusting:

  • Oil not only greases brass parts, allowing them to move with little friction, but it also acts as a rust-prevention shield. 
  • The concept is simple: when brass is coated in oil, water cannot interact with the iron in the metal and cause corrosion.

Here are some best oils I have found:

3-IN-ONE – 10038 Multi-Purpose Oil,
Cast Iron Seasoning Oil 

Benefits of recommended products:

  • Serves to protect from corrosion and rust by lubricating, cleaning, and lubricating. 
  • Its new package incorporates a fill level indicator strip that informs you whenever you’re getting low and enables precise application with no spatter.
  • Excellent for tires, rollers, doors, belts, machine tools, tiny engine exterior components, latches, screws, motorcycles, rims, blowers, and a variety of other mechanical parts.

Topping with powder:

Powder coating metal surfaces can help prevent them from rusting.

However, while powder-coating offers long-term durability, it is not impervious to the effects of the weather. As a result, while powder-coated metal does not rust, it can deteriorate if the powder coating dissolves.

Benefits of powder coating:

  • The powder coating produces a layer that prevents rust and other sorts of deterioration. Powder coating creates a strong barrier that prevents the brass from rusting.
  • Powder coating on practically any sort of metal provides customers, organizations, and corporations with one of the most cost-effective and long-lasting finishes available. 
  • Powder finishes are more resistant to cracking, peeling, and discoloration.


Electroplating is the method of applying a metal coating to surfaces electrically. By adding a fine, extremely durable coating to a surface, electroplating acts as a protective barrier that reduces friction and prevents corrosion while also preserving it from damage.

Why Use Electroplating in the First Place?

  • Electroplating makes your element more immune to fading and rusting by covering it in a less conductive material. 
  • If the base metal is brittle, it can also boost heat resistance and make the component stronger against impacts and tremors.
  • By coating them with nickel, you can make your elements move more readily across neighboring surfaces without warming or scratching.
  • Electroplating is sometimes utilized as a transition between both the core material and the outer layer. This aids the outer coating’s adhesion to the substrate.
Materials Needed
Two different metals
An electrolytic solution


The procedure of putting a protective zinc layer to metal to avoid corrosion is known as or galvanizing). The most popular procedure is hot-dip galvanizing, which involves immersing steel parts in liquid zinc metal. 

Galvanizing prevents rusting in several ways:

  • It serves as a deterrent, preventing corrosive chemicals from penetrating the steel or iron beneath.
  • The zinc acts as an anode material, meaning that if the covering is damaged, the bare metal is still shielded by the zinc that remains.
  • Because zinc corrodes earlier iron, it preserves its base metal.
  • The exterior of the zinc interacts with the environment to generate a dense, adhering varnish that is impermeable in rainwater. 
Materials required for Galvanizing
Molten Zinc


How bluing controls rust:

  • Bluing brass results in the formation of a new covering that is comparable to rust but far less harmful. 
  • Blueing forms a thin layer of magnetite, commonly known as black iron oxide, on metals, giving them a dark-colored look.

Extreme temps and a salt solution are frequently used to blue anything. This method is often used to preserve guns against rusting at a low cost. Blueing is most effective when the brass is also lubricated on a regular basis. 

Store Properly:

Why proper storage is compulsory:

  • The most obvious method of preventing corrosion is to protect the item away from moisture. 
  • Corrosion is formed when water reacts with iron, hence a dry atmosphere will not produce rust. 
  • Keep in mind, however, that even dry air contains moisture in the form of humidity. 
  • You’d need air and water-tight seal to totally avoid corrosion. 
  • Of course, this would make the device impossible to use, therefore preventing rust during storage or shipping makes more sense.

Cover the surface with a dry coat:

  • Some chemicals are designed to keep corrosion away. A corrosion prevention dry coating is perfect for steel elements that need to keep clean or provide a good grip.
  • Dry coating corrosion preventatives, such as ARMOR’s Dry Coat Rust Preventative, can be applied in a variety of ways, including spraying, dipping, and washing.
  • The passive layer will be in place after they have dried. Because the material will not change in appearance and its applications will not change.

Here is some top-recommended dry coating:

T-9 Rust Inhibitor

Benefits of T-9 Rust Inhibitor:

  • Expels humidity, pushes out dust and obsolete oils, and permeates moving components.
  • It dries to a fine, sticky coating that lasts months on the metal surface.

303 Marine Corrosion Coat

Benefits of 303 Marine Corrosion Coat:

  • Resistant To Moisture And Saltwater
  • Light, dry consistency
  • Corrosion is stopped and prevented when it comes into contact with it

Few tips for preventing the brass from rusting:

Some tips are given below to protect the brass from rusting.

  • Maintain a Clean and Dry Environment
  • Avoid Scratches
  • Maintenance on a regular basis
  • Apply a dry Coating of Protection
  • Make use of galvanized metal
  • Make use of metal conditioners

I will now elaborate on the guidance given above.

Maintain a Clean and Dry Environment:

When it comes to rust, water is the worst adversary because oxygen in molecules of water reacts with iron to generate metal oxides. As a result, metals left outside, such as vehicles, fences, and tankers, are more susceptible to corrosion. 

Use a dehydrator if the object is in a moist indoor setting, including a basement or garage. It’s critical to keep brass clean since any form of sludge or filth attached to the surface might store moisture.

Avoid Scratches:

Brass scrapes or fissures expose more brass and store moisture, allowing it to stay in touch with the iron.

Maintenance on a regular basis:

Apply lukewarm soapy water to the surface of the brass with a cloth for regular, cleanings. Gentle surfactants can also be used for this task. Special metal cleaners and polishes may be required for more severe spots.

Maintenance on regular basis is compulsory.

  • Because corrosion spread very quickly, scraping it off as quickly as it emerges is critical. 
  • To avoid additional corrosion, clean with hot soapy water, then apply a metal conditioner or other surface coatings. 
Materials required
Soapy water
Steel cleanser
A piece of Fabric

Apply a dry Coating of Protection:

Brass objects can be protected from corrosion by dipping them in a bluing solution containing water, caustic soda, and potassium. Brass objects, such as equipment, outdoor gear, cars, and massive metal pieces, can be protected with commonly available corrosion protection treatments in the form of aerosol spray cans or fabric wipes.

Materials Required
Aerosol sprays
Fabric wipes

Make use of galvanized metal:

Galvanization is a corrosion-resistant coating that is applied to the metal to keep it rust-free for so many years. A brass object gets treated with liquid zinc during the galvanizing process. 

Zinc provides protection to brass in three ways:

  • The zinc coating, for starters, serves as a barrier, keeping water and oxygen from accessing the brass. 
  • Secondly, even if the covering is scraped off, the zinc persists to provide cathodic protection to surrounding metal regions. 
  • Finally, zinc is extremely reactive to oxygen, forming a protective layer of zinc oxide that protects the brass from further corrosion.

Make use of metal conditioners:

Because corrosion spread very quickly, scraping it off as quickly as it emerges is critical. To avoid additional corrosion, wash with hot water and detergent, then spray a metal conditioner or other surface coatings. Apply a fresh coat of paint to the surface if required.

Here’s a top recommended Metal Conditioner:

XADO Highway Atomic Metal Conditioner

Benefits of this product:

  • Increased oil pressure creates an effective protection scheme for parts against loads and excessive heat, which enhances oil lubricating properties and motor unit tribological features.

Frequently Asked Questions(FAQs), “How to rustproof brass?”

How do you make brass rustproof?

  • To produce a mixture, combine the salt and just enough lime juice. 
  • Polish the brass using a delicate cloth dipped in the paste. 
  • Immerse a rotary-head tool with a cleaning head in the mixture and rub it to the brass hardware at medium speed if obstinate tarnish persists.

What do you put on brass to keep it from tarnishing?

A light layer of linseed oil or mineral oil could be applied on clean brass using a clean cotton cloth to prevent corrosion. Many brass artifacts have a lacquer coating that should be washed only with hot, water and soap.

How do you keep brass tarnish-free?

Tarnishing can be prevented with a thin application of mineral oil or linseed oil. After wiping the brass and gold lamp with a delicate terry cloth, apply the oil. 

The lacquer coating is seen on the majority of the gold and brass lamps. As a result, hot soapy water should not be used to clean it.

Is brass good for the outdoors?

Brass is a strong metal created from a mix of copper and zinc that keeps up well in any climate. As it is exposed to the atmosphere, brass will “patina,” or darken, but it will not corrode, making it an excellent choice for exterior and garden lighting.

How do you keep metal from rusting in water?

Follow the guidance below to keep metal from rusting.

  • Maintain a clean and dry environment. When it pertains to corrosion, moisture is the worst adversary because the oxygen in water vapor reacts with the metal to generate oxide.
  • Scratches should be avoided at all costs.
  • Add a Layer of Protection.
  • Stainless steel should be used.
  • Make use of galvanized metal.
  • Maintenance is required on a routine basis.

How do you keep metal from rusting in the ground?

Because of its protective metal covering, galvanized metal is a good choice. If you’re going to use metal, like steel or iron, make sure it’s galvanized to prevent it from rotting underneath. Steel can be preserved from corrosion by forming a protective layer of a different metal, such as zinc or magnesium, around it.


Leave a Comment